20- FORK BRIDGE 160 mm BETOR BULTACO SWM
€40.69
VAT included
Tres días hábiles.
Bultaco hairpin bridge. 160mm bar center distance
It must be used together with the Grib flanges, for Bultaco or Betor they are the B-53.2mm.
Also valid for SWM with 35 and 38 mm Betor, Merlin with 38mm Betor and any bike with Betor Bultaco type forks and a distance between the centers of 160 mm bars.
Together with the aluminum Grib flanges, the bridge is not a simple support of the fender, it is a system of union of the two suspension bottles that notably reinforces the stiffness of the steering.
The complete bridge kit, in addition to the aluminum bridge, consists of:
2 flanges machined in anodized duralumin B-D53.2 or B-D53.2 with stop, for 35 mm forks. For the 38 mm ones, the flanges must be the J-D55.5 with or without stop.
1 set of risers also machined in duralumin and anodized (B) necessary for Betor 35 mm type Bultaco forks. For those of 38 there are special hikes.
-
Política de seguridad (editar con el módulo Información de seguridad y confianza para el cliente)
-
Política de envío (editar con el módulo Información de seguridad y confianza para el cliente)
-
Política de devolución (editar con el módulo Información de seguridad y confianza para el cliente)
Bultaco hairpin bridge. 160mm bar center distance
It must be used together with the Grib flanges, for Bultaco or Betor they are the B-53.2mm.
Also valid for SWM with 35 and 38 mm Betor, Merlin with 38mm Betor and any bike with Betor Bultaco type forks and a distance between the centers of 160 mm bars.
Together with the aluminum Grib flanges, the bridge is not a simple support of the fender, it is a system of union of the two suspension bottles that notably reinforces the stiffness of the steering.
The complete bridge kit, in addition to the aluminum bridge, consists of:
2 flanges machined in anodized duralumin B-D53.2 or B-D53.2 with stop, for 35 mm forks. For the 38 mm ones, the flanges must be the J-D55.5 with or without stop.
1 set of risers also machined in duralumin and anodized (B) necessary for Betor 35 mm type Bultaco forks. For those of 38 there are special hikes.
Bultaco hairpin bridge. 160mm bar center distance
It must be used together with the Grib flanges, for Bultaco or Betor they are the B-53.2mm.
Also valid for SWM with 35 and 38 mm Betor, Merlin with 38mm Betor and any bike with Betor Bultaco type forks and a distance between the centers of 160 mm bars.
Together with the aluminum Grib flanges, the bridge is not a simple support of the fender, it is a system of union of the two suspension bottles that notably reinforces the stiffness of the steering.
The complete bridge kit, in addition to the aluminum bridge, consists of:
2 flanges machined in anodized duralumin B-D53.2 or B-D53.2 with stop, for 35 mm forks. For the 38 mm ones, the flanges must be the J-D55.5 with or without stop.
1 set of risers also machined in duralumin and anodized (B) necessary for Betor 35 mm type Bultaco forks. For those of 38 there are special hikes.